Description
Overview
The DMS 2 is the solution to your test problems dealing with corrosion
inspections- even, and especially, when it comes to handling demanding and critical test tasks – for
example on coated components or at high temperatures.
The DMS 2’s straight-forward display shows you all measurement details at a glance. The echo display
(A-scan) helps you to have your measurements better under control and to avoid material related
errors in measurement – eg. Due to cracks or inhomogenities – as you are able to reliably
distinguish them from the actual measured values. The user-friendly Data Recorder provides extensive
documentation capabilities that meet all the test requirements in the field. To improve the
reliability of your tests and to offer you greater ease in testing,GE Inspection Technologies have
equipped the DMS 2 with state-of-the-art technology and special features.
Features
- Automatic recognition of all dialog probes for optimum instrument setup and performance, as well
as for the documentation - Enhanced single-element mode for the connection of several probes, also for precision thickness
measurements - Automatic probe zeroing for the precise setting of the instrument to different probes and test
conditions - Minimum-capture mode with increased pulse repetition frequency for the display and storage of
the minimum reading - RF display mode, four automatic band-passes, selectable display update rate and much more
Specifications
| Sheet1 |
| Operating principle | Ultrasonic pulse-echo method |
| Probe zero adjustment | Automatic or manually by pressing a key after coupling to zero block |
| Measuring Range DMS 2E | .025 to 25.00 (0.6 mm to 635 mm) DMS 2 and DMS 2TC: .008 to 25.00 (0.2 mm to 635 mm) in steel, in standard operation, depending on t |
| Operating frequency | 32 Hz in MIN-Capture mode and B-scan display mode; 4 Hz or 8 Hz (selectable) in standard setup |
| Gain | Automatic or manual in 1 dB steps |
| Receiver bandwidth | 0.5 to 15 MHz |
| Material velocity range | 39,400 to 393,662 inches/s 1000 to 9999 m/s |
| Power supply | 4 standard batteries (AA 1.5 V), AlMn or NiMH batteries |
| Operating time | With NiMH batteries min. 40 hours (with backlight and operating frequency 4 Hz) |
| Operating temperature | +10 °F to +120 °F -10 °C to +50 °C |
| Keypad | Dust and watertight sealed membrane keypad Housing / battery compartment Impact-resistant, dust- and splash-proof gasket-sealed, IP 54 |
| Display graphic | transflective LCD, 71 mm x 95 mm, 240 x 320 pixels, switchable backlight, adjustable contrast |
| Digits | 4-digit display, digit height |
| File formats | 8 file formats (3 with the DMS 2E); can be configured later Microgrid: subsequent insertion of 2×2 to 9×9 grid per measuring point; 1 to 16 |
Downloads
GE DMS 2 Product Brochure
Reviews
There are no reviews yet.